XZM Ultrafine Mill

XZM Series Ultrafine Mill

XZM Ultrafine mill

Zenith XZM ultrafine mill is widely used for micron powder producing. The output size can reach 2500mesh (5um). XZM ultrafine mill has absorbed many advantages of home and aboard mill manufacturing technique. It is the representation of leading level of high quality grinding machine.

Ultrafine grinding mill is suitable to grind the material with middle and low hardness, moisture below 6%, and the material should be non-explosive and non-flammable, such as: calcite, chalk, limestone, dolomite, kaolin, bentonite, steatite, mica, magnetite, iolite, pyrophillite, vermiculite, meerschaum, attapulgite, diatomite, barite, gypsum, alunite, graphite, fluorite, phosphate ore, potassium ore pumice, etc. The size of the finished product can be adjusted between 325-2500 mesh.

Ultrafine Mill Working Principle

1.The whole system of the grinding mill consists of main unit, deceleration machine, classifier, blower, hammer crusher, bucket elevator, electro-magnetic vibrating feeder, pulse dust cleaner, piping device, cyclone collector device, classifier, high-pressure motor and muffler.

2.The main bearing and each dial are driven by electromotor of main equipment through reducer, when the ultrafine mill is at work. Then Dial drives numbers of rollers rolling and rotating in the ring by plunger.

3.Big materials are crushed into smaller particles by hammer crusher. Then they are sent to store house by elevator. The electro-magnetic vibrating feeder sends the materials evenly to the middle of the upper dial. Under the function of the eccentricity, the materials scatter to the side of the circle and fall into the ring to be pressed, crushed and milled into pieces by rollers. After the first crush, materials fall into the second and the third layer. The pumping of the high-pressure centrifugal blower put the outside air into the machine. The coarse powder will be brought into the classifier.

4.The rotating turbine in the collector makes the coarse particles fall back for regrinding. The fine particles will come into the cyclone collector with the airflow and discharged by the discharging valve on the bottom of the collector. They are the final products. The airflow with little dust will be discharged through blower and muffler after being purified by the cyclone collector.

Ultrafine Grinding Mill Benefits

  1. Analyzer machine applies high-density blade.
  2. The body connected to the base of all soft contact without rigid contact, and this avoids the body vibration to the analyzer, improved the accuracy of the analysis.
  3. The base made of high strength ductile cast iron Ductile cast iron has the performance of damping force of molten steel, and good impact resistance.
  4. The coupling of the elastic sleeve is used in the main unit and the gearbox, which avoided the phenomenon of easily breaking nylon pin, thus improving the reliability of equipment.

Technical Data

XZM Ultrafine Mill
Name & Model XZM221 XZM232 XZM236
Ring roll number (pcs) 21 32 36
Working diameter (mm) Φ800 Φ900 Φ1000
Grinding rill and roller path number (pcs) 1X3 1×4 1×4
Revolving Speed (rmin) 230-240 200-220 180-200
Max feed size (mm) ≤10 ≤20 ≤20
Final size (mesh) 325-2500 325-2500 325-2500
Output (kgh) 400-4500 400-5500 400-7500
contour dimension (mm) 13000×3000×5800 14700×4800×8600 18000×4600×8600
Whole machine capacity (kw) 144-165 185-204 263-290
Main motor Model YB2-250M-4 YB2-280M-8 YB2-315L1-6
Power (kw) 55 45×2 110
Rotate speed (rmin) 1440 750 990
Analytical engine (FM motor) Model Y180M-4 Y180L-4 Y100L1-4
Power (kw) 18.5 22 30
Rotate speed (rmin) 1440 1440 1440
Blower motor Model Y225M-2 Y250M-2 Y280M-2
Power (kw) 45 55 75
Rotate speed (rmin) 2940 2940 2940
Elevator Bucket model TH-200 TH-200 TH-300
Motor model Y100L-4 YB2-100L2-4 YB2-112M-4
Motor power (kw) 3 3 4
Rotate speed (rmin) 1440 1440 1440
Hammer Crusher Hammer Crusher model PC300×400 PC400×600 PC400×600
Motor model YB2-160M-4 YB2-180M-4 YB2-180M-4
Power (kw) 11 18.5 18.5
Rotate speed (rmin) 1440 1440 1440
Magnetic vibrating feeder Model GZ1F GZ1F  
Power (kw) 0.06 0.06  
Electrical machine Model     LS159×1050
Power (kw)     2.2
Discharge valve Discharge valve model ZJD-200 ZJD-200 ZJD-200
Motor model YB2-80M2-4 YB2-80M2-4 YB2-80M2-4
Power (kw) 0.75×2 0.75×2 0.75×3
Rotate speed (rmin) 1440 1440 1440
Pulse dust collectors Model DMC120-II model DMC144-II model DMC184-II model
Air compressor Air compressor Model KSH100D-7.5KW KSH240D-15KW KSH240D-15KW
Motor model YB2-132M-4 YB2-160L-4 YB2-160L-4
Power (kw) 7.5 15 15
Rotate speed (rmin) 1440 1440 1440

Related Grinding Mill: